Catalog by UNI-T

Used to measure DC low resistance through 4-wire method. Unknown wire length calculation (FT/M); two-way data transmission by USB interface.

Mini True RMS digital clamp meter for conducting current, voltage, resistance and capacitance measurements, as well as diode and continuity test.

An easy-to-use infrared thermometer for surface temperature measurements within the range from -32 °C to 800 °C. Response time: 250 ms. D:S ratio: 30:1.

A digital tachometer for rotation speed measurements within 10-99999 range.

K-type temperature sensor for UNI-T multimeters with ball tips and banana plugs.

62° FOV of sound image, 25 FPS refresh rate, 2 - 48 kHz frequency band, and a 128-channel MEMS digital microphone for a quick identification of partial discharges

UNI-T UT512 is designed for earth resistance testing to 2000 Ω and earth voltage testing to 200 V AC

Measuring resistance from 0 MΩ to 20 GΩ. Test voltages may be selected between 500 V / 1000 V / 2500 V.

True RMS clamp measures AC/DC current, AC/DC voltage, resistance, capacitance, temperature, duty cycle, continuity, and may be used for diode testing.

It can measure Max. 1000V DC/AC voltage, Max. 20A DC/AC current, resistance, capacitance, frequency, temperature, diode, hFE, continuity and NCV, distinguish between neutral and live wires.

Device for earth resistance testing up to 4000 Ω and earth voltage testing up to 400 V AC.

A single-channel power supply provides DC voltage power supply in a range of 0 to 30 V, and current in a range of 0 to 5 A.

AC/DC voltage, AC/DC current, resistance, frequency, capacitance, temperature. Diode, continuity tests. NCV measurements.

Insulation resistance tester which is designed to measure the insulation resistance from 1 MΩ to 1000 GΩ in the ranges of 500 V, 1000 V, 2500 V and 5000 V.

The tool used to measure AC/DC voltage, AC/DC current, resistance, frequency, capacitance, temperature, as well as to perform live wire/continuity/diode testing.

True RMS clamp measures AC/DC current, AC/DC voltage, resistance, capacitance, duty cycle, continuity, and may be used for diode testing.

Measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, temperature, duty ration, and is also used for continuity and diode testing.

Used to measure 1000V DC/AC voltage, 20A DC/AC current, resistance, capacitance, frequency, diode, hFE, continuity, and NCV, perform the LED test, and to distinguish between neutral and live wires.

Pocket size digital multimeter which measures AC/DC voltage, DC current, resistance, tests diodes and checking continuity + NCV!

Selectable test voltages of 50V, 100V, 250V, 500V and 1000V. Measuring resistance levels in the ranges from 0.01MΩ up to 20.0GΩ.

True RMS clamp meter which measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty ratio, continuity, and also may be used for diodes testing.

Insulation resistance and AC voltage measurements. Auto ranging. LCD backlight.

True RMS multimeter for measuring AC/DC voltage & current, resistance, frequency, capacitance and performing hFE, diode, continuity tests. LIVE function.

Insulation tester which is designed to measure the insulation resistance in the range from 0.5 MΩ to 100 000 MΩ with a test voltage of 500 to 2500 V.